Water Main & Service Line in Sandy, Utah

Typically the property owner owns from the meter to the house, and the utility owns from the main to the meter — but the boundary and the rules around lead service lines vary by jurisdiction. Confirm with your water utility before authorizing work.

Replacement is strongly recommended and in many jurisdictions is being required or subsidized on a schedule. Ask your utility whether a replacement program or cost-share applies to your address before paying full price.

If static street pressure exceeds the code threshold — commonly 80 psi — a pressure-reducing valve is required and protects every fixture and appliance in the house. A licensed plumber can measure static pressure in minutes.

Permits in Sandy are issued by Sandy Building Division. As a rule, water heater replacement, gas work, sewer laterals and repiping are permitted work, while a like-for-like faucet or disposal swap usually is not. A licensed contractor pulls the permit — if one offers to skip it, that is the signal to stop.

Requests route around the clock, but most contractors price after-hours work differently. Ask for the after-hours rate and a committed arrival window before agreeing to a dispatch.

Three things: where the water or problem is showing, whether the supply is shut off, and the property type — slab, crawl space or basement. With those, a pro covering Sandy can triage the urgency and bring the right parts.

Line by line against scope: what is included, what is excluded, who pulls the permit, and whether haul-away and restoration are inside the number. The cost guides on this site list published third-party ranges so any quote can be sanity-checked.

The licensed contractor pulls the permit — never the homeowner. If a contractor proposes skipping a required permit, treat that as the signal to stop and verify the license.