Toilet Repair & Installation in Salt Lake City, Utah

Almost always the flapper or the fill valve. A worn flapper lets water seep from tank to bowl until the fill valve tops it up again; a failed fill valve never shuts off. Both are inexpensive parts — the cost is mostly the visit.

Water at the base normally means the wax ring seal has failed or the closet flange is broken. That is not a cosmetic issue: waste water is reaching the subfloor. It needs the fixture pulled, not caulked over.

If the tank internals are the problem, repair is inexpensive and sensible. If the fixture is cracked, chronically weak-flushing, or a pre-1994 high-volume model, replacement usually makes more sense on both water use and reliability.

Permits in Salt Lake City are issued by Salt Lake City Building Services. As a rule, water heater replacement, gas work, sewer laterals and repiping are permitted work, while a like-for-like faucet or disposal swap usually is not. A licensed contractor pulls the permit — if one offers to skip it, that is the signal to stop.

Three things: where the water or problem is showing, whether the supply is shut off, and the property type — slab, crawl space or basement. With those, a pro covering Salt Lake City can triage the urgency and bring the right parts.

Line by line against scope: what is included, what is excluded, who pulls the permit, and whether haul-away and restoration are inside the number. The cost guides on this site list published third-party ranges so any quote can be sanity-checked.

The licensed contractor pulls the permit — never the homeowner. If a contractor proposes skipping a required permit, treat that as the signal to stop and verify the license.

Whatever the contractor offers in writing — PlumberUtah is not a party to the agreement. Ask for labor and parts warranty terms in the quote, and keep the license number with the paperwork.